6
Fig. 3.4
CHOICE OF THE BURNER
On the control panel, near every knob,
there is a diagram that indicates which
burner is controlled by that knob.
The suitable burner must be chosen
according to the diameter and the
capacity used.
As an indication, the burners and the
pots must be used in the following way:
It is important that the diameter of the
pot be suitable to the potentiality of the
burner so as not to compromise the high
output of the burners and therefore
energy waste.
A small pot on a large burner does not
give you a boiling point in a shorten
amount of time since the capacity of
heat absorption of a liquid mass
depends on the volume and the surface
of the pot.
BURNERS
POT DIAMETER
Auxiliary 12 - 16 cm
Semi-rapid
16 - 20 cm
Rapid
20 - 24 cm
Double-ring
wok
Fig.
3.5b
Fig.
3.5a
WRONG
CORRECT
CORRECT USE OF
DOUBLE-RING BURNER
The flat-bottomed pans are to be placed
directly onto the pan-support.
To use the WOK you need to place the
proper stand in order to avoid any faulty
operation of the double-ring burner
(Fig. 3.5)
MODELS WITH BATTERY IGNITION
- If the electronic ignition does not work
make sure that the battery, installed
on the back of the cooker, is not flat
and has been installed correctly (see
the chapter “Battery installation”, page
19
).
Содержание EC 530
Страница 35: ...35 Identification label...