Elba EBO9810S, Инструкции по использованию - Советы по установке

Страница: 29 / 40

29
1
2
Fig. 10.9
REPLACING THE OVEN LIGHT
Before any maintenance is started
involving electrical parts of the appli-
ance, it must be disconnected from the
power supply.
– Let the oven cavity and the heating
elements cool down
– Switch off the electrical supply
– Unscrew the protective cover (fig.
10.9)
–
– Refit the protective cover.
NOTE : Oven bulb replacement is not
covered by your guarantee.
GREASE FILTER (some models only)
– Slide in the grease filter on the back
of the oven as in Fig. 10.8.
– Clean the filter after any cooking!
The grease filter can be removed for
cleaning and should be washed regu-
larly in hot soapy water (fig. 10.8).
– Always dry the filter properly before
fitting it back into the oven.
Fig. 10.8
Unscrew and replace the bulb with a
new one suitable for high temperatures
(300°C) having the following specifica-
tions: 230-240V 50 Hz, E14 and same
power (check watt power as stamped
in the bulb itself) of the replaced bulb.
.
.
.