w w w . e l a t i o n l i g h t i n g . c o m
23
VOLT Q5E™ User Manual ver 2
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to
“Slave 1”
in the menu
“SetSlave”
, the Master unit sends
“Prog 1”
to the Slave unit.
If set to
“Slave 2”
, the Slave unit receives
“Prog 2”
.
To start an Auto Program proceed as follows:
1. Slave Setting
• Select
“FuncMode”
.
• Press
ENTER
to confirm.
• Select
“SetSlave”
.
• Press
ENTER
to confirm.
• Select
“Slave 1”
,
“Slave 2”
or
“Slave 3”
.
• Press
ENTER
to confirm.
• Press
MODE/ESC
in order to return to the main menu.
2. Automatic Program Run
• Select
“FuncMode”
.
• Press
ENTER
to confirm.
• Select
“AutoProg”
.
• Press
ENTER
to confirm.
• Select
“Master”
or
“Alone”
.
• Press
ENTER
to confirm.
• Press
MODE/ESC
in order to return to the main menu.
Содержание VOLT Q5E SIX PACK
Страница 1: ...VOLT Q5E SIX PACK user manual E L A TI ON VOLT Q5E SIX PACK user manual...
Страница 34: ......
