15
SYSTEM MENU
ON-BOARD SYSTEM MENU
The
SIXPAR 300™
comes with an easy to navigate system menu. The next sections will cover
how to access each menu function.
LCD CONTROL PANEL DISPLAY
The (4) button control panel (see image below) located on back of the fixture allows you to
access the main menu and make all necessary adjustments to the
SIXPAR 300™
.
During normal operation, pressing the
MODE
button will navigate through the different function
menus. Once you reach a desired menu, press the
ENTER
button to select that menu. The
variable field that can be adjusted within the selected menu will begin to flash. Using the
UP
or
DOWN
buttons, adjust the field until the desired value is displayed. For example, the
CHANNEL
CH
: menu variable field can be set to
06
,
07
,
08
, or
12
. Pressing the
ENTER
button once will
confirm your selected value. Exit at any time without making any adjustments by pressing the
MODE
button.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered
ON
, the display shows the following information:
Update
Wait...
SIXPAR
300
300
V1.14
*Fixture Software Version (≥)
LCD CONTROL PANEL LOCKOUT
When the
Display ON
menu is set to
OFF1
, the LCD display will turn OFF after 30 seconds and
the (4) button Control Panel will be LOCKED. To unlock the (4) button LCD control panel follow
these steps:
1. When locked, the display will show:
LOCKED*****
2. Press
UP
, then the display will change to:
LOCKED****
(one * disappears)
3. Press
DOWN
, then the display will change to:
LOCKED***
(two * disappear)
4. Press
UP
, then the display will change to:
LOCKED**
(three * disappear)
5. Press
DOWN
, then the display will change to:
LOCKED*
(4 * disappear)
6. Press
ENTER
, then the display will change to
LOCKED
and then become unlocked
