Elation KL FRESNEL 8, Руководство пользователя

Страница: 18 / 26

18
M A N U A L D I M M I N G A N D Z O O M C O N T R O L
FEATURE IS DISABLED WHEN DMX INPUT CABLE IS CONNECTED TO FIXTURE!
TO USE DIMMING AND ZOOM KNOBS, DISCONNECT DMX CABLE IF CONNECTED.
Follow steps below to enable manual DIMMING and ZOOM control knobs.
1. Access fixture system menu navigating to Test menu then access ManCtrl sub menu.
MAIN MENU SUB MENU OPTIONS / VALUES
(Default Settings in BOLD )
DESCRIPTION
Test
Reset.M Zoom Reset Zoom Motor
ManCtrl Dimmer, Zoom, Strobe Manual Control Functions
Calibrat
PassWord Password= 050
Calibrate Zoom Motor
(PSWD Required to Access)
Zoom 000-255
NOTE : To access the LCD Menu Control Display when locked/OFF, press and hold the
MODE button for 3 seconds.
2. Select Stobe menu, set to value of 255 (LED ON) , then exit fixture system menu.
3. Push DIMMING knob to unlock, rotate to desired level, push knob again to lock.
Repeat this process each time a dimmer adjustment is desired.
4. Push
ZOOM
knob to unlock, rotate to desired level, push knob in again to lock.
Repeat this process each time a dimmer adjustment is desired.
LCD DISPLAY
DMX CABLE CONNECTED NO DMX CABLE CONNECTED