Elation KL FRESNEL 8, Руководство пользователя

Страница: 15 / 26

15
SYSTEM MENU - Supports Software Versions: ≥ 1.02
Features subject to change without notice.
MAIN MENU SUB MENU OPTIONS / VALUES
(Default Settings in BOLD )
DESCRIPTION
Address
Address 001 ~ XXX Set DMX Address Setting
UserMode User Mode
2CH,
3CH
,4CH, 6CH
Set DMX Channel / User Mode
Function
Status Lost Dmx Hold / Black Function If NO DMX Detected
LCD. Set
Display ON / OFF
OLED Display Screen Saver Mode
*When ON goes off after 30 seconds.
ONLY WHEN DMX IS CONNECTED.
Key Lock ON / OFF Control Front Panel Buttons Key Lock
Flash ON / OFF Display flashes when NO DMX
Invert OFF / ON Flip LCD Display 180º
Temp. C/F
F / C
Temperature Switch Between C˚/ F˚
Dim Curve Standard , Stage, TV, Architec, Theatre Set Dimmer Curve Mode
Disp. Set ADDR
, Disp.CH, Salve
Set Information to Display on LCD
Fan. Set Led Fan Auto , High, LoW Set LED Fan Speed
Gamma 2.0 , 2.2, 2.4, 2.8 Set Gamma Brightness
Frequen
900Hz
, 1000Hz, 1100Hz, 1200Hz, 1300Hz,
1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz,
10Hz, 15Hz, 20Hz, 25Hz Set LED Refreash Frequency
USB_Data OFF , ON
Software Update Port - Contact
Service
DFSE OFF , ON Restore Factory Settings
Info
TimeInfo
Current 000 (Hours) Fixture Run Time From Power ON
Total 000 (Hours) Fixture Total Run Time
Last 000 (Hours) Clear Fixture Last Run Time
Password PIN= 050 Enter PIN to Access Clear Last. Menu
Clear ON / OFF Reset Fixture Last Run Time
TempInfo Led Temp
000
F
(C)
Temperature of LED
Err. Info Error Record 1 ~ Error Record 10 Display 10 Recent Error Messages
ModelInf KLF8 Display Model Name
Software Software V1.02
Software Version
(Greater than or Equal to)
Test
Reset.M Zoom Reset Zoom Motor
ManCtrl Dimmer, Zoom, Strobe Manual Control Functions
Calibrat
PassWord Password= 050
Calibrate Zoom Motor
(PSWD Required to Access)
Zoom 000-255
SYSTEM MENU UPDATE WITH SOFTWARE UPDATE VERSION ≥ 1.0.7
See highlighted menu items below which have been updated with this software update.
SYSTEM MENU - Supports Software Versions: ≥ 1.07
Features subject to change without notice.
MAIN MENU SUB MENU OPTIONS / VALUES
(Default Settings in BOLD )
DESCRIPTION
UserMode
User Mode 2CH, 3CH , 2-3CH , 4CH, 2-4CH , 6CH Set DMX Channel / User Mode
Function
Dim Curve Standard , Stage, TV, Architec, Theatre. Stage2 Set Dimmer Curve Mode
Gamma 1.0
,
2.0
, 2.2, 2.4, 2.8
Set Gamma Brightness