Elation Professional - www.elationlighting.com - Page 8
•
For external storage, press the CARD button, the corresponding LED will light up,
that means you have entered the CF card operation (CF card should be firstly
formatted before use). The UP / DOWN buttons can be used to choose sequences,
and the PLAY / PAUSE / STOP buttons can be used to control the running of
sequences. When the sequence is stopped, press the CARD button for a second
time to return to the internal operation.
•
Should the selected sequence not exist, the PLAY function will not be effective.
•
The NEXT, ENTER and RECORD functions are disabled in MANUAL mode.
6.2 AUTOSTART mode
•
In AUTOSTART mode, the foregoing recorded sequences can be rerun
automatically (With the CF card, the STARTUP and SHUTDOWN functions are not
automatic). While sequence is running, press the STOP button to SHUTDOWN the
sequence, when it stops running, all sequences will be stopped.
•
AUTOSTART can be executed once. After the STARTUP sequence finished, the
selected sequences will run automatically, and correspondent operation can be
done manually. Pressing the STOP button, will SHUTDOWN the.
•
STARTUP and SHUTDOWN sequences cannot be operated manually under this
mode, they can only automatically run after respectively pressing the PLAY and
STOP buttons.
•
AUTOSTART
can be rerun after the unit restarts.
6.3 DMX MON mode
•
In this mode, DMX signals can be monitored. In the case that the DMX signals are
disabled, this unit can initiate a prepared system to enable the pre-selected
sequences.
•
When there is an effective signal input, the DMX indicator will light up, and the signal
(DMX Thru) will be sent out through this unit. If the signal is missing, STARTUP and
the selected sequences will start automatically. Pressing the STOP button will stop
the running sequences. After the SHUTDOWN sequence run over, all the operation
will be finished.
•
This unit can only check the effective DMX signals. If there is no data input, the pre-
selected sequences will run normally.
•
STARTUP and SHUTDOWN sequences cannot be operated manually in this mode.
And the AUTOSTART mode may be available for reference to the operation in
MANUAL mode.
•
Once an effective DMX signal is received, the running sequences will stop
automatically. The PLAY, PAUSE and STOP buttons will not function.
