Elation DR-512 Скачать руководство пользователя страница 10

Страница: 10 / 14

Elation Professional - www.elationlighting.com - Page 10

or No (Y/N), and press the ENTER button to enter the trigger time setting mode.

I01

00:00:00:00

E01

00:00:00:00

There are 8 Trigger times that our available to change, for sequences

I01~I04

and

sequences

E01~E04.

The interval between two Trigger Times is at least 2 seconds.

If the Trigger time is zero, the Trigger time is not set.

(2)

Smpte Rec:

In this mode you can enable or disable the Smpte Record function.

Press the NEXT button, and then use the UP / DOWN buttons to choose “ON.

(3)

Smpte Frame:

use this submenu to set the frame levels of Smpte time. 24/25/30

frames are available. The preset level must be identical with the frame level of the

received Smpte signals.

(4)

Sys Time:

this submenu is used to set the system time for internal operation or

external operation. Press the NEXT button, and then use the UP / DOWN buttons

to choose the option of “IN” or “EXT”.

(5)

Format Card:

Use this submenu to format the CF card. Press the NEXT button,

and then use the UP / DOWN buttons to choose Yes or No (Y/N.

(6)

First Trigger Time:

this item is related with

Smpte Trig

and

Smpte Rec

. In this

mode, the user can see the current recorded Smpte trigger time. (the First trigger

point can be accessed after the Smpte signals have been triggered and the

corresponding trigger time has been set. The Smpte trigger time can be recorded

only under the condition that not all the DMX levels are at zero.)

(7)

Lock Program:

in this submenu you are able to lock or unlock the PRG mode. The

LCD will show you Yes or No (Y / N) to select one. Choose your option and press

“Enter” to confirm, The LCD will display “

Lock Program!

” or “

Unlock

Program!

”. If

you choose “Y”, the Program mode will be in hidden state.

External Terminals

The following flowchart shows, SeqA and SeqB can be used to realize the remote

control upon

01/

02/

01/

02. The PLAY, STOP, RECORD buttons can be used to

control the running states.

Some information about Prg-mode LED, Record LED and Play LED:

In PRG mode, the

Prg-mode LED

will be “on”. When the internal

Record LED

is “on”,

Содержание DR-512















Результаты поиска

Содержание DR-512

Отзывы:

Бренды по названию

Популярные бренды

Elation DR-512, Инструкция пользователя

Результаты поиска

Содержание DR-512

Отзывы:

Бренды по названию

Популярные бренды