Elation Professional - www.elationlighting.com - Page 12
Cause :
Because the selected Sequence does not exist.
Recovery: The sequence must be recorded first, and then it should it be be able to play.
•
Problem
3
:
Nothing happens when the RECORD button is pushed.
Cause :
Because recordings can only be made in the Program mode.
Also, check and be sure that the unit is receiving a DMX signal.
Recovery: Switch to the Program mode and make sure that the DMX signal input is OK.
•
Problem
4
:
Nothing happens when I push the PLAY or PAUSE button while
recording data under Program mode.
Cause :
Because there is no vacant space for recording.
Recovery: Delete useless data to have more space for recording.
•
Problem 5: Nothing happens when pushing the STARTUP or SHUTDOWN button.
Cause : These two buttons can’t be used freely in every operation mode. They can only
be used in MANUAL mode, DMX TRIGGER mode or PROGRAM mode.
In other modes, they are controlled automatically.
Recovery: Select a mode that allows the use of the STARTUP and SHUTDOWN function.
•
Problem 6: Sequenses can not be triggered in TRIGGER mode when operating .
Cause : Sequences can only be triggered when the unit is receiving a DMX signal.
Recovery : Be sure the DMX indicator is “on”. This means that the unit is receiving a
DMX signal.
