Elation DR-512 Скачать руководство пользователя страница 4

Elation Professional  -  www.elationlighting.com -  Page 4

  

Customer Support:

 

Elation Professional

®

 provides a customer support line, to

provide set up help and to answer any question should you encounter problems during
your set up or initial operation. You may also visit us on the web at
www.elationlighting.com for any comments or suggestions. For service related issue
please contact Elation Professional

®

. Service Hours are Monday through Friday 9:00

a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(323) 582-3322

Fax:  

(323) 582-3108

E-mail: 

[email protected]

Warning

To prevent or reduce the risk of electrical shock or fire, do not expose this

unit to rain or moisture.

Caution

!

 

There are no user serviceable parts inside this unit. Do not attempt any

repairs yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle when ever
possible.

Safety Warnings!

•  To reduce the risk of electrical shock or fire, do not expose this unit to rain

or moisture.

•  Do not spill water or other liquids  into or on to your unit.
•  Do not attempt to remove or break off the ground prong from the electrical

cord.   This prong is used to reduce the risk of electrical shock and fire in
case of an   internal short. Do not attempt to operate this unit if the power
cord has been frayed or broken.

•  Disconnect from main power before making any type of connection.
•  Do not remove the cover under any conditions. There are no user serviceable

parts   inside.

•  Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

•  Do not attempt to operate this unit, if it becomes damaged.
•  This unit is intended for indoor use only, use of this product outdoors voids

all warranties.

•  During long periods of non-use, disconnect the unit’s main power.
•  Always mount this unit in safe and stable matter.
•  Power cords should be routed so they are not likely to be walked on, pinched

by items placed upon or against them.

•  Cleaning -The fixture should be cleaned only as recommended by the

manufacturer. See page 3 for cleaning details.

•  Heat -The appliance should be situated away from heat sources such as

radiators heat registers, stoves, or other appliances (including amplifiers)
that produce heat.

•  The fixture should be serviced by qualified service personnel when:

A.

 

The power-supply cord or the plug has been damaged.

B.

 

Objects have fallen, or liquid has been spilled into the unit.

C.

 

The unit has been exposed to rain or water.

D.

 

The unit does not appear to operate normally or exhibits a
marked change in performance.

 

Содержание DR-512















Отзывы: