Elation Design Spot 1400E страница 60 Скачать руководство пользователя

Страница: 60 / 68

Design Spot 1400E™

©Elation Professional® 60 Design Spot 1400E™

19. 2-YEAR LIMITED WARRANTY

A. Elation Professional

hereby warrants, to the original purchaser, Elation Professional

products to be free of manufacturing defects in material and workmanship for a period of two

years, (730 days) from the date of purchase. This warranty shall be valid only if the product

is purchased within the United States of America, including possessions and territories. It is

the owner’s responsibility to establish the date and place of purchase by acceptable

evidence, at the time service is sought.

B. For warranty service, send the product only to the Elation Professional

factory. All

shipping charges must be pre-paid. If the requested repairs or service (including parts

replacement) are within the terms of this warranty, Elation Professional

will pay return

shipping charges only to a designated point within the United States. If the entire instrument

is sent, it must be shipped in its original package. No accessories should be shipped with the

product. If any accessories are shipped with the product, Elation Professional

shall have no

liability what so ever for loss of or damage to any such accessories, nor for the safe return

thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modified in any manner which Elation Professional

concludes, after inspection, affects the

reliability of the product; if the product has been repaired or serviced by anyone other than

the Elation Professional

factory unless prior written authorization was issued to purchaser

by Elation Professional

; if the product is damaged because not properly maintained as set

forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period specified above, Elation Professional

will replace

defective parts at its expense, and will absorb all expenses for warranty service and repair

labor by reason of defects in material or workmanship. The sole responsibility of Elation

Professional

under this warranty shall be limited to the repair of the product, or replacement

thereof, including parts, at the sole discretion of Elation Professional

®.

All products covered

by this warranty were manufactured after January 1, 1990, and bare identifying marks to that

Содержание Design Spot 1400E





































































Результаты поиска

Содержание Design Spot 1400E

Отзывы:

Похожие инструкции для Design Spot 1400E

Бренды по названию

Популярные бренды

Elation Design Spot 1400E, Руководство пользователя

Результаты поиска

Содержание Design Spot 1400E

Отзывы:

Похожие инструкции для Design Spot 1400E

Бренды по названию

Популярные бренды