Elation Design Spot 1400E страница 6 Скачать руководство пользователя | Manualshive

Страница: 6 / 68

background image

Design Spot 1400E™

©Elation Professional® 6 Design Spot 1400E™

2. SAFETY INSTRUCTIONS

The Design Spot 1400E™ is an extremely sophisticated piece of
electronic  equipment.  To  guarantee  a  smooth  operation,  it  is
important  to  follow  the  guidelines  in  this  manual.  The
manufacturer  of  this  device  will  not  accept  responsibility  for
damages  resulting  from  the  misuse  of  this  fixture  due  to  the
disregard of the information printed in this manual.

1. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

2. Never touch the fixture during normal operation. This can cause severe personal

injuries and/or damage to the fixture.

3. Be sure to unplug the Design Spot 1400E™ from the power outlet before

performing any service related issues.

4. Lamp Replacement; Please wait at least 15 minutes after disconnecting the main

power before you open the Design Spot 1400E™. To prevent personal injury,

never touch the lamp if you are not absolutely sure it has cooled.

5. Never look directly into the lamp beam. You risk injury to your retina, which may

induce blindness.

6. Be sure to track and record the lamp running time. The lamp should be changed at

the end of the specified lamp life, regardless of lamp output. You may also have to

change the lamp if it shows any deformations or damage. The same is with all

glass components, color filters, lenses and mirrors.

7. For safe operation, follow the Installation guide described in chapter five of this

manual. Operating the Design Spot 1400E™ without suited safety aids such as

safety cables or clamps can increase the risk of damage and/or personal injury.

8. Qualified and certified personnel should only perform installation.

9. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

«
...
4
5
6
7
8
...
»

Содержание Design Spot 1400E





































































Отзывы:

Нет отзывов

Похожие инструкции для Design Spot 1400E

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

Бренд: CAMPAGNOLA Страницы: 4

Бренд: Rath Страницы: 5

Бренд: TC Electronic Страницы: 4

Бренд: TC Electronic Страницы: 6

Бренд: TC-Helicon Страницы: 12

Бренд: TC Electronic Страницы: 76

Бренд: Ultraflex Страницы: 48

Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...

Бренд: M-Audio Страницы: 25

Бренд: MÄDLER Страницы: 4

MOSQUITOTRAP MIE5

Бренд: Jata hogar Страницы: 20

Бренд: EuroLite Страницы: 2

CareTips Provox FreeHands FlexiVoice

Бренд: Atos Medical Страницы: 2

Бренд: Petromax Страницы: 16

Бренд: SereneLife Страницы: 4

Бренд: Tascam Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды