Elation Color Tone 50 Скачать руководство пользователя

Страница: 4 / 44

Color Tone 50™

©Elation Professional®

Color Tone 50™

1. GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Color Tone 50,™ has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING:

Thank you for purchasing the Color Tone 50™ by Elation Professional®.

Every Color Tone 50™ has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may have occurred

during shipping. If the carton appears to be damaged, carefully inspect your unit for damage

and be sure all accessories necessary to operate the unit have arrived intact. In the event

damage has been found or parts are missing, please contact our customer support team for

further instructions. Please do not return this unit to your dealer without first contacting

customer support at the number listed below.

CUSTOMER SUPPORT:

Elation Professional

provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice:

(323) 582-3322

Fax:

(323) 582-3108

E-mail:

[email protected]

Forum:

www.ElationLighting.com/forum

Warning

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Содержание Color Tone 50













































Результаты поиска

Содержание Color Tone 50

Отзывы:

Похожие инструкции для Color Tone 50

Бренды по названию

Популярные бренды

Elation Color Tone 50, Инструкция пользователя

Результаты поиска

Содержание Color Tone 50

Отзывы:

Похожие инструкции для Color Tone 50

Бренды по названию

Популярные бренды