Color Tone 50™
©Elation Professional®
26
Color Tone 50™
the last fixture.
For the unit functioning as the “Master” unit follow the same procedures
listed in the previous Stand-Alone section.
For the “Slave” units, access the “Set To Slave” settings in the “Function
Mode” menu and assign each slave fixture a designation (Slave 1, Slave 2,
Slave 3…etc).
10.3 Universal DMX Control:
This function allows you to use a universal DMX-512
controller such as the Elation® Show Designer 2™ or Elation® Show Designer 3™ to
control head movement, the color wheel, the shutter (strobe), and all other DMX traits.
A DMX controller allows you to create unique programs tailored to your individual
needs. The Color Tone 50™ uses up to 7 DMX channels. See page
30
for detailed
description of the DMX traits. To control your fixture in DMX mode, follow the set-up
procedures on pages
13-16
as well as the set-up specifications that are included with
your DMX controller. Use the controller’s faders to control the various DMX fixture traits.
This will allow you to create your own programs.
Follow the instruction on page
23
to set the DMX address.
Be sure to use a terminator on the last fixture, especially for longer cable
runs (more than a 100 feet).
For help operating in DMX mode, consult the manual that was included with
your DMX controller.
Содержание Color Tone 50
