Elation Artiste Monet, Руководство пользователя

Страница: 19 / 46

19
I N S T A L L A T I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener
¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included
Omega Brackets
using an M10 screw fitted through the
center hole of the
Omega Brackets
. The fixture provides a built-in rigging points for a
SAFETY CABLE
. Be sure to only use one of the designated rigging points for the safety
cable and never secure a safety cable to a carrying handle.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT INCLUDED)
THAT MEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES AND REGULATIONS
WHENEVER INSTALLING FIXTURE IN A SUSPENDED ENVIRONMENT!
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a
Gigabit
Ethernet Switch
that supports
IGMP (Internet Group Management Protocol)
is
required. Using a
Gigabit Ethernet Switch
that does not support
IGMP
can cause erratic
behavior of all connected devices to the switch. Click link below for more information
about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol