background image

VIA!2-8.4                                                                                    PREFACE

© 

ELAN Home Systems 2006  • All rights reserved.                                      iii

Safety Summary

Please review the following material carefully. Failure to follow the instruc-

tions or failure to heed the warnings contained herein could lead to seri-

ous injury.

CAUTION:  Risk of explosion if battery is replaced by an 

incorrect type. Dispose of used batteries according to 

the instructions. Failure to comply may result in serious 

injury.

Special Battery Cautions

The following are special precautions you should take when using and 

handling batteries.

Do not expose batteries to direct sunlight or extreme heat

Do not submerge batteries in liquid

Do not incinerate batteries

Do not handle damaged or leaking battery packs

Do not attempt to discharge batteries by short-circuiting them

Do not attempt to charge batteries with a charger other than one 

approved for use with the VIA!2-8.4

Do not leave or operate the VIA!2-8.4 or VIA!2-8.4 batteries in an 

excessively hot environment such as a closed vehicle under hot 

sunshine or beside a fire, heater, or blow dryer. Do not leave the 

VIA!2-8.4 exposed to excessive heat for any period of time. 

Excessive heat exposure may result in melting, or cause the elec-

tronics/battery to overheat resulting in fire.

Use only the supplied batteries and AC Adapter. Failure to follow 

this instruction may result in battery burst or liquid leak, and may 

cause fire, or injury.

Store and Dispose of all batteries in accordance with the instruc-

tions contained herein. Never dispose of the battery by burning. 

Any such action may result in excessive heating, explosion, or fire.

Do not disassemble, modify, puncture, or strike any battery with 

force or allow batteries to become wet. Any such action may 

result in excessive heat, explosion, or ignition.

If at anytime the VIA!2-8.4 batteries should smell, heat up, 

become discolored, leak fluid, change shape, or experience an 

abnormal occurrence, remove the battery from the VIA!2-8.4 and 

do not use it. 

Should leaking fluid from the battery make contact with skin, eyes 

or clothes, flush immediately with water. If there is contact with 

eyes, seek medical treatment immediately. Failure to follow these 

instructions may result in skin rash or significant eye damage.

Содержание ViA 2-8.4





































Отзывы: