09
contact
EL-4KPM-VIP-CTRL/TX/RX
USER MANUAL
Understanding Product Status Lights
Transmitter Audio Embedding
TX
RX TX
LINE IN
HDMI IN
IR
IR
RX
TX
RS-232
24 56V
-
GND
0.5A
1
Receiver Audio Breakout
TX
RX
Link
RX
TX
CH Select
IR
IR
RX TX GND
RS-232
CH
EL-4KPM-VIP-RX
VIDEO OVER IP
L /R
24 56V
-
HDMI Out
0.5A
Link
PoE PWR
CH
CH Select
Lan
EL-4KPM-VIP-TX
VIDEO OVER IP
RX TX
LINE IN
HDMI IN
IR
IR
RX
TX
RS-232
24 56V
-
GND
0.5A
2
The Video Over IP products have several LED lights to indicate connectivity status and help diagnose connection problems.
Link
PoE PWR
CH
CH Select
Lan
EL-4KPM-VIP-TX
VIDEO OVER IP
1
3
2
4
Video Over IP Status Lights
1
LAN PoE status light - Solid Orange indicates PoE from the network switch powering the Video Over IP product
2
LAN status light - Solid Green indicates active network connection
3
Power status light - Off = No power, Flashing = Product booting, On = Power on
4
Link status light - Off = No connection to network, Flashing = not connected to any device (another Video Over IP product or
network switch), On = Connected to Video Over IP device or network switch
Audio Connections
1
Analog L/R Line Level audio input
The Analog line level input can be used to replace the original HDMI audio of the source connected to the Video Over IP
Transmitter with Analog L/R 2ch line level audio. The embedded Analog audio is then distributed with the adjacent HDMI video
signal throughout the Video Over IP system.
Switching between original HDMI audio and embedded line level analog 2ch audio is achieved using ELAN serial/Telnet/IP
commands.
Note: It is only possible to select EITHER HDMI audio or local Analog line input. It is not possible to distribute both audio sources at
the same time.
2
Analogue L/R Line Level audio output
The EL-4KPM-VIP-RX Video Over IP Receiver includes audio breakout from the selected HDMI source to associated Analogue L/R
audio outputs. Extracted audio will be concurrent with the corresponding HDMI video output.
Note: The source input must be PCM 2ch audio for Analogue audio outputs to work. The ELAN Video Over IP products do not
down-mix Dolby Digital, DTS or 5.1ch audio signals.