
07
contact
EL-4KPM-VIP-CTRL/TX/RX
USER MANUAL
EL-4KPM-VIP-CTRL Front Panel
5V
RX
IR
RS-232
RX TX GND
Mode
1A
LAN
LAN
PoE PWR
VIDEO LAN
CONTROL LAN
EL-4KPM-VIP-CTRL
7
6
5
4
1
Control LAN port - Connect to existing network that your third party control system resides on. The Control LAN port is used for
Telnet/IP control of the Video Over IP system
2
Video Over IP Video LAN port - Connect to the layer 3 network switch that the ELAN Video Over IP components are connected to
3
Power LED indicator
4
Power port – Use 5V 1A DC adaptor (sold separately) if not using a PoE network switch
5
IR RX (IR input) – 3.5mm stereo jack. Connect to third party control system if you are using IR as your method of controlling the
Video Over IP system. Please use supplied ELAN IRR 5V IR Receiver. When using the ELAN IRCAB cable (optional) ensure cable
direction is correct.
Note: Only basic switching commands are available when using IR as a method of control. Advanced Video Over IP features are
only available using Telnet/IP and RS-232
6
RS-232 control port – Connect to a third party control device for control of the Video Over IP system using RS-232
7
Mode dip-switches - Used for adjusting the RS-232 control port baudrate settings as per the chart below.
Note - If changing the Baudrate settings of the EL-4KPM-VIP-CTRL you must power cycle the unit for these to update
EL-4KPM-VIP-CTRL Rear Panel
Panel Description - EL-4KPM-VIP-CTRL Control Module
5V
RX
IR
RS-232
RX TX GND
Mode
1A
LAN
LAN
PoE PWR
VIDEO LAN
CONTROL LAN
EL-4KPM-VIP-CTRL
2
1
3
Data Bit:
8-bit
Parity:
None
Stop Bit:
1-bit
Flow Control:
None
Baudrate
Mode Dip-
Switch 1
Mode Dip-
Switch 2
9600
Down
Down
19200
Down
Up
57600
Up
Down
115200
Up
Up