
25
contact
EL-4KPM-VIP-CTRL/TX/RX
USER MANUAL
2)
Confirming the number of Video Over IP Transmitter and Receiver products to be set up
The following window is used to confirm how many Transmitter and Receiver products you are about to configure.
It is important that these totals are correct as the wizard will guide you through the set up of each product one-by-one. You can add
transmitters or receivers to the system at a later stage if required.
During the set up of each product, the PC wizard will automatically assign an IP address to each product.
The number of Transmitters or Receivers must not exceed 762 devices due to the auto IP address configuration.
If you plan to
connect more than 762x transmitters or 762x receivers to the system, please contact ELAN Technical support.
Transmitters
The first product to be assigned an IP address is an EL-4KPM-VIP-TX Transmitter which will be given the IP address of 169.254.3.1.
The next Transmitter will be assigned an IP address of 169.254.3.2 and so on....
Once the IP range of 169.254.3.x is filled (254 units), the PC wizard will auto assign an IP address of 169.254.4.1 and so on...
Once the IP range of 169.254.4.x is filled the PC wizard will auto assign an IP address of 169.254.5.1 and so on until 169.254.4.254
Receivers
After all Transmitter products have been set up the PC wizard will automatically assign an IP address to the Video Over IP Receivers.
The first EL-4KPM-VIP-RX Receiver will be given the IP address of 169.254.6.1. The next Receiver will be assigned an IP address of
169.254.6.2 and so on....
Once the IP range of 169.254.6.x is filled (254 units) the PC wizard will auto assign an IP address of 169.254.7.1 and so on...
Once the IP range of 169.254.7.x is filled the PC wizard will auto assign an IP address of 169.254.8.1 and so on until 169.254.8.254
The above automatic IP configuration is why the system component quantity limitations are 762x Transmitters and 762x Receivers.