6
Power supply connection
DMX Signal Connection
The equipment can be used in the wide voltage input. Please make sure the voltage is the scale of rated
voltage when connecting the power. The equipment can adapt to 100V to 240 V AC voltage and 50-60 Hz.
1. Use DMX512 controller, use the DMX signal (male) to plug into the first lamp (female) 3 pin
2. Put out of the equipment of the first signal wire(head),connected to the equipment of the next 3 pin plug(-
female),so on. See pictures below.
s
Connection
Pin
Brown
AC Live
1
Blue
AC Neutral
2
Green/Yellow
AC Ground
3
