7
Control board function
Menu Instructions
[DMX address setting]
[Function selection]
• Press MENU when it shows [Address]
then press ENTER
• Change the DMX address by UP or DOWN
• Press MENU until it shows [Intro] press ENTER
• Press UP or DOWN to choose [Reset] , [Run].
• When choosing [Reset] press ENTER and press UP or DOWN to choose [YES] or [NO]. When choo-
sing [YES],press ENTER into the whole light reset.
• When choosing Run, press ENTER. Press UP or DOWN to choose [DMX512], [Auto1], [Auto2],
[Sound1] [Sound2], [Slave] When choosing [DMX512] the DMX controller sending the signal (3 pin
signal is valid),the corresponding display board DMX 512LED flashing.
• When choosing [Auto1], [Auto2], [Sound1 ] or [Sound2], [Auto1], [Auto2], [Sound1], [Sound2],
choose Auto or Sound mode, it can be used as the master.
• When choosing [Slave] it is Slave receive the Master signal.Choose the Slave need to quit to the main
menu can be controlled.
Menu Map
5. Operating Instructions
Button
Function
MENU
Choose Menu or function exit
ENTER
Current show menu or enter into the current selected
function
UP
Increase the value
DOWN
Decrease the value
