/ 9 /
EK recommends users to find an appropriate position in your
computer chassis to install the EK-XRES Revo D5 pump as-
sembly. To successfully install the EK-XRES Revo D5 pump/
reservoir assembly please complete the following steps:
1. Find an appropriate position for the unit inside (or perhaps
outside) of your computer chassis; drill mounting holes if
needed. Sticker with designated holes position is enclosed.
Before drilling stick it to the Computer chassis.
2. Attach the EK-Revo D5 Holder to the computer chas-
sis metal frame using enclosed 4 (four) M4x10 DIN7984
screws and PVC washers. Secure the screws using en-
closed Allen key 2.5mm.
3. Insert the rubber damper into the EK-Revo D5 Holder.
Insert the pump into the damper. And secure it using two
M3x12 DIN7984 screws from the side of the holder. Use
enclosed 2mm Allen key. Your installation is now complete.
