/ 6 /
USING POLYETHER ANTI-VORTEX FOAM or EK-HD Tube
EK-XRES Revo D5 series pump top / reservoir comes pre-
installed with Anticyclone by default. In case your system
suffers from excessive vortex issues, air bleeding problems
or if the pump is sucking in air you may replace the anticy-
clone with the enclosed polyether foam or EK-HD Tube.
There are two ways to use the polyether anti-vortex foam:
Default configuration
PE foam – use whole
This is the default configuration
of EK-XRES Revo D5 series
reservoir.
Use the foam as a whole to re-
place the Anticyclone.