/ 11 /
It is mandatory to use the correct INLET and
OUTLET ports:
1. The OUTLET port (pressure port) is, when the
reservoir sits in upright position, positioned lower
than the inlet port.
2. The INLET port(s) (suction port) is the port with
G1/4 threading plane.
3. Make sure not to use fittings or barbs with G1/4
thread longer than 5mm! All EK-ACF, EK-HDC fit-
tings are compatible!
Port on reservoir’s top part is not intended to
be used as inlet port. The aforementioned port
should only be used for connecting this reservoir
with external fill port!