/ 17 /
STEP 3:
Install backplate rubber gasket and place metal backplate for Intel
LGA-115x socket to the back of your motherboard RIBBED SIDE
UP! (facing away from the motherboard). Align the holes on the
motherboard with holes on rubber gasket and backplate.
Make sure to orientate the rubber gasket to fit past the
CPU socket ILM backplate.
Carefully rotate motherboard assembly with front side facing up
with one hand while holding the backplate and rubber in place with
the other hand.
STEP 4:
Install four (4) M4 thumb screws onto your motherboard. It is
mandatory to put 0.7mm plastic washer underneath each of the
M4 thumb screws. Tighten the screws to the metal backplate until
you reach the end of the thread. Using tools (such as pliers) is not
recommended.
STEP 5:
Install the motherboard back into the computer chassis
STEP 3
STEP 4
Rubber gasket
Motherboard
Metal
Backplate
M4 Thumb
Screw
PVC
washer
STEP 5
Содержание EK-MLC PHOENIX Series
