/ 10 /
CONNECTING THE HUB TO THE POWER SUPLY
STEP 1:
Take the enclosed power cable and plug the two-pin PCI-express minifit power connector
to the fan splitter hub.
STEP 2:
Use the SATA POWER connector at the other end and plug it to the female connector
found on the main power supply.
CONNEECTING THE HUB TO THE MOTHERBOARD
In order to obtain the PWM fan speed control you must follow the steps below:
STEP 3:
Take the enclosed connection cable and plug the two-pin cable connector to the fan splitter hub.
STEP 4:
Use the 4-pin connector at the other end and plug it to the male connector header located
on the motherboard. Always use CPU-dedicated fan headers if possible.
Always use CPU fan header. On majority of motherboards these headers
usually offer best PWM regulation.
STEP 2
STEP 1
STEP 4
STEP 3
Only CPU Module
Only GPU Module
CPU & GPU Module
Two GPU Modules (no CPU Module)
EK-MLC Phoenix 120
EK-MLC Phoenix 240
EK-MLC Phoenix 360
EK-MLC Phoenix 140
EK-MLC Phoenix 280
EK-MLC PHOENIX QDC CONNECTIONS GUIDE
ELECTRICAL CONNECTIONS
Содержание EK-MLC PHOENIX Series
