/ 23 /
Pump-Reservoir
Combo Unit
UNI Bracket
Washer M4 x 0.8
M4 x 4 Screw
STEP 1
INSTALLING THE PUMP-RESERVOIR UNIT
TO THE BOTTOM OF THE CASE
STEP 1
Your Classic Kit comes with a combined pump and reservoir unit
with a pre-installed anti-vibration holder.
Take the unit and place it on the chosen bracket vertically, as shown
in the picture
.
You can turn the pump in any direction, but do not turn it
upside-down.
Secure the pump from the backside using four (4) M4 x 10 screws
and PVC washers. Tighten them in a clockwise direction using the
enclosed 2.5mm Allen key.
This unit can be installed without the use of a pump bracket
if there is a 62 x 34mm rectangular mounting hole pattern
in the chassis.
For detailed instructions on how to install
the Pump-Reservoir unit, scan the QR code
on the Pump-Reservoir packaging box.
