SURFACE MOUNT LEDFIRE III EMERGENCY INSTALLATION INSTRUCTIONS
DRAFT
13. DALI WIRING/ CENtRAL BAttERY SYStEM
14. Using tHe inverter WitH a sWitcH
15. Using tHe inverter WitH a sensor
The Surface Mount Ledfire III inverter supports DALI out of the box, illustrated in the hardwiring diagram
shown below. The inverter also supports central battery systems and can be monitored through DALI.
When used as a central battery system the devices can be tested with DALI.
A mains rated switch can be wired with this product to turn ON/OFF the non-emergency light in normal use.
This does not affect operation in emergency mode.
A mains rated sensor can be wired with this product to turn ON/OFF the light in normal use. This does not
affect operation in emergency mode.
Figure 9: Inverter DALI wiring diagram
Figure 10: Inverter switch wiring diagram
Figure 11: Inverter sensor wiring diagram
8
Mains rated switch
Mains rated sensor
