DK50 3x4VR/M
10/2018
NP-DK50-3x4VRM_ED-EN-2_10-2018
- 17-
ETHERNET CONNECTION
The compressor may be connected to an
Ethernet 10/100 M network via the controller
as follows:
1. Use the RJ-45 connector (on the
switchboard door) to connect a cable
to the Ethernet network.
2. The user shall then request IT staff to
connect the compressor to the
user’s
Ethernet network. The equipment’s
default
IP
addresses
are:
BM=192.168.0.3,
TDE=192.168.0.2,
sub-mask =255.255.255.0.
or
3. The
user
shall
request
the
configuration of IP addresses (specific
or requested) from the manufacturer
before the compressor is shipped, or
configure the IP addresses (specific or
requested) based on the manual (see
the service manual) or via the
compressor manufacturer’s technical
support for such purposes.
Web server
The controller has an integrated Web
Server
function
that
facilitates
compressor monitoring via a PC,
smartphone
or
tablet
using
a
conventional web browser (Mozilla,
Opera, Safari, Google Chrome, etc.)
The process for logging into the Web
Server function once the compressor is
connected to an Ethernet network is as
follows:
Open the web browser on a PC,
smartphone or tablet and enter the IP
address of the controller (192.168.0.3)
Enter the password “LOGO” and click on the
“LOG on” button.
After logging in, the browser displays the first
screen showing the system information for the
controller itself: module generation, model,
firmware (FW), IP address and activity status.
Click on the “LOGO! BM” function in the
browser to display the current virtual status of
the BM text display screen. Navigate through
the screen using the cursor keys the same as
on the real display
Содержание DK50-3X4VR/M
Страница 1: ...User manual EN DK50 3X4VR M...
Страница 2: ...October 2018 Z_2195 2018 Chap 2 pgs 5...