EKO MP-11, Инструкция по эксплуатации

Страница: 42 / 96

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7 Pg. 41
1) Edit Parameter
Registered parameter list is displayed when the
“EDIT” is selected from the Measurement Parameter
Setting screen.
Parameter list which is already registered.
No parameters registered.
A. Module Parameter Setting
Bring the cursor to the subjected parameter name for editing by using the Up/Down buttons then
press the Enter button.
“PARAMETER LIST” list appears at first. In this list, there are Si
(Mono-crystal/Poly-crystal Silicon), a-Si (non-crystalline, amorphous), CIS (CIS-type Thin Film),
and Custom with reference values already provided.
The input values for the Custom parameter are also provided as below for the default.
There are reference values for the
“
α, β, Rs, κ
” given for 3 types of
modules. These values can be edited on this screen
NOTE: The given parameter values for the Si, a-Si, and CIS are
only reference values. For better precision measurements, set
the parameters with the values provided on the catalog for the
modules, which to be measured.
B. Sensor Unit Options
In the next screen on Sensor Unit Option screen, determine whether to use the Sensor Unit or not.
Select either the
“USE SENSOR UNIT” or “MAIN UNIT ONLY” and
press the Enter button.
On the next page, steps are described on how to edit the parameters
in the cases of using the Sensor Unit and Main Unit Only.
Registered Parameter List
01: EKOTEST1
02: EKOTEST2
03: AAA
04: BBB
05:
no name
06: no name
PARAMETER EDIT
a-Si Parameter Screen
Area
1.1790 m
2
Alpha 0.0009 A/deg
Beta -0.20000 V/deg
Rs 7.0000 ohm
K -0.1500 ohm/deg
Connection S:01 P:01
01 PARAMETER 2/2
CIS Parameter Screen
Area
1.2280 m
2
Alpha 0.0002 A/deg
Beta -0.0660 V/deg
Rs 2.0000 ohm
K -0.0090 ohm/deg
Connection S:01 P:0
01 PARAMETER 2/2
Si Parameter Screen
Area
1.3230 m
2
Alpha 0.0026 A/deg
Beta -0.0900 V/deg
Rs 0.6000 ohm
K 0.0020 ohm/deg
Connection S:01 P:01
01 PARAMETER 2/2
PV Module/Array Parameter Setting Screens
Sensor Unit Option Screen
01 PARAMETER EDIT
MAIN UNIT ONLY
USE SENSOR UNIT
Registered Parameter List