21
transported.Usually this range extends to the area where the payload or vehicle attachment
lands.
Unauthorized personnel must require him to leave the danger area.As long as the person
may cause some kind of injury, the driver must give the warning, if the driver asks him to
leave but has not left the dangerous area, must stop immediately.
10.4.7 high-risk environment:
when working in high-risk environment, special design
must be adopted to protect it.
The car is not specifically designed for high-risk environments.
10.4.8 safety devices and warning signs:
safety devices, warning signs and warning
notices described in the operation manual must be given sufficient attention.
10.4.9 driving in public places:
cars are prohibited from driving in public places except
special areas.
10.4.10 distance between vehicles:
keep in mind that the vehicle ahead may suddenly stop
at any time, so keep a proper distance.
10.4.14 operation management:
the driving speed must be adapted to local
conditions.Vehicles must travel slowly when passing through curves, narrow passages,
revolving doors, and in unobstructed areas.The driver must be able to visually detect
sufficient braking distance between the vehicle and the vehicle in front of him, and he must
always control his vehicle.It is not allowed to stop suddenly (unless urgent), turn in the
opposite direction quickly, and chase each other in places where the passage is not open.
10.4.15 visibility:
drivers must keep their eyes on the driving direction to ensure that the
path ahead is clearly visible.When the vehicle retreats, the cargo is blocked from view and
must be accompanied by a second person walking in front of the vehicle to give appropriate
guidance and warning.
10.4.16 through ramps:
only known ramps are allowed, and the ramps should be clean,
non-skid and allowed by vehicle technical specifications.Heavy loads on cargo forks must
face upward.Turning around, going sideways, or stopping at the same place on the ramp is
not allowed.The ramp must be driven slowly and be ready to brake at all times.
10.4.17 ground load:
please check whether the weight of body and load or the pressure of
wheels on the ground exceeds the bearing capacity of the ground when the vehicle is
working.
Содержание EP18LI Series
Страница 12: ...9 6 Electrical Schematic Diagram...
Страница 13: ...10 7 Hydraulic Schematic Diagram...
Страница 18: ...15 Replace the hydraulic filter...
