EKKO EP18LI Series, Руководство пользователя

Страница: 20 / 27

17
9) when removing the battery pack, hold the plug with your hand instead of pulling the
cord;
10) after the battery is used, if the battery is hot and before recharging, please cool in the
ventilated environment;
11) do not put batteries in water or seawater;
12) do not try to separate, squeeze, impact the battery, the battery will heat or fire, the
lye in the battery will be harmful to the skin and eyes, and will damage the clothes;
13) keep the battery away from children.
9.4.4 Disposition of worn-out accumulators
Worn-out accumulators should be recycled according to local regulations, and stored in
specified zone or cast-off treatment zone. These works should be done by qualified
specialized companies.
9.4.5 Specification of the battery
Battery Charger
Rated power
：
24V
Rated capacity
：
40-60Ah
Input
：
195/265VAC
50/60Hz
Output
：
DC24V10A
The battery's non-insulated terminal must be protected by an insulating cover.When the
battery is connected and connected to the socket, the vehicle must be cut off and the switch
in the closed position.When replacing or assembling the battery, make sure the battery is
securely fixed in the battery box.
9.4.6 Storage, transportation and installation of the accumulator
The truck must be parked on the level ground steadily. To prevent short circuit,naked cable
ends and the terminal posts should be covered with insulated covers. When pulling out the
accumulator, properly arrange removed accumulator's connectors and cables without
blocking access of the accumulator.
9.4.7 Battery power indicator
Battery power display table:ten article showing represent 100% of the battery.With the
consumption of battery capacity, the glowing article shows will be from top to down.
The color of LED show the different states
：