EKKO EOP68, Руководство пользователя

Страница: 26 / 33

22
9.2Charging
⚫
Only be charged with included charger
⚫
Before using the charger ,Please fully understand the contents of
the charger manual
⚫
Ensure good ventilation in charging room
Park the car in a safe area that provide dedicated power .Lower fork , and
remove the cargo. Turn off the power of car, Open the battery cover, then
connect the connector and Charger. The charger starts charging .Finishing
charging .Remove the connector from the charger, Connect the connector
to the car and cover the battery cover .
Battery specification :24V/280Ah ,Charger specification :24V/40A
10. Maintain Introduction
⚫
Only Qualified and trained personnel are allowed to maintain the
car .
⚫
Remove the cargo from the fork and lower the fork to the lowest
point before maintenance .
⚫
Please use the designated binding equipment or lifting equipment
in accordance with chapter 4 ,if it is necessary to lift the car .Before
operation .Place safety device(such as lifting jacks,Wedges or
Wooden blocks)under the car to prevent accidental falling ,moving
or sliding .
⚫ Use approved and distributor
’
S original accessories .
⚫ Please consider the machine failure and accident that may be
caused by the leakage of hydraulic oil.
⚫ Only trained maintenance technicians are allowed to adjust the
pressure Valve .
Check the key point on the maintenance list
10.1Maintenance list
Table 6 Maintain list
Time interval(Month)
1 3 6 12
No. Hydraulic system
1 Check if there is any damaged noise and leakage for
hydraulic cylinder and piston
•
！
！