EKKO EOP68, Руководство пользователя

Страница: 28 / 33

24
Figure 18 lubrication point
10.2Lubrication point
Lubrication point according to the maintenance list .required grease
specification :DIN:51825
1..Drive gear
2.Joint bearing
3. Chain
4.Door frame roller
4.Front wheel bearing
10.3Check and refill hydraulic oil
Required hydraulic oil type
：
⚫
H-LP 46, DIN 51524
⚫
Viscosity 41.4 – 47
⚫ According to the model, the amount of oil depends on the height
Waste material such as waste oil, Waste batteries or other materials must be
treated and recycled in accordance with the national regulations, It should be
send to the recycling company for recycling .if necessary. The oil level should not
be lower than the min amount oil required to lift cargo .Add oil to filling point if
necessary.
10.4Check the electrical fuse
Remove the cover ,The fuse is located as figure 19.
The fuse specification is shown in table 7
table 7 fuse specification
Comprehensive
40
Check if all labels are clear and complete
•
41
Check if the shield panel and protection is not damaged
•
42 Check the caster ,to height adjust or replace it if worn
•
43 Conduct a test run •