eKey TOCAnet, Руководство по установке

Страница: 8 / 12

- 8 -
Operation
4. How to swipe a finger correctly over the sensor
In order for the reader to properly scan and recognize a particular
finger, the finger needs to be positioned and swept correctly over the
sensor as outlined below:
a. Locate the reader sensor between the 2 green illuminated arrows.
b. Starting from the finger joint, place the finger flat over the sensor.
It is very important that the whole finger is placed flat over
the sensor and not just the tip
.
c. Apply little pressure and start sweeping the finger immediately all
the way down. The bigger the identified finger surface, the higher
is the probability that you are recognised again by the system.
Recommended
finger area
Sensor