_ Electronic Ovens _ rev. 0 _______________________________________________________________ KF 1010 UD _
_________________________________________________________________________________________ page 13 _
measured inside the cooking chamber for 3 seconds (blinking led on symbol ).
- “Humidity/steam” parameter
The set value is displayed (fixed led on symbol
).
- “Temperature at heart” parameter
The set value (fixed led on symbol
) is displayed for 3 seconds alternated by the value
read inside the food for 3 seconds.
“
“
“
“
AT HEART
AT HEART
AT HEART
AT HEART
”
”
”
”
TEMPERATURE CANNOT
TEMPERATURE CANNOT
TEMPERATURE CANNOT
TEMPERATURE CANNOT BE SET OR CHANGED WH
BE SET OR CHANGED WH
BE SET OR CHANGED WH
BE SET OR CHANGED WHEN THE COOKING CYCLE
EN THE COOKING CYCLE
EN THE COOKING CYCLE
EN THE COOKING CYCLE IS ON
IS ON
IS ON
IS ON
....
It can only be displayed if the "needle" probe (connected to the specific socket) is inserted in food.
- “Half motor speed/half power” parameter
“ON” appears on the display is the parameter is on or “oFF” if the parameter is off (fixed led on
symbol
). Remember that halving motor speed (fans) halves the heating power and thus
cooking time and the amount to be cooked must be adjusted (different motor noise is perfectly
normal at reduced speed).
For the user’s convenience, when the selector is turned to “O”, the cooking cycle count down will be
displayed for 3 seconds alternated by the temperature measured in the cooking chamber for 3
seconds.
3.7
3.7
3.7
3.7 P
PP
Programmed mode
rogrammed mode
rogrammed mode
rogrammed mode
Up to 10 cooking programs (cycles) can be saved.
Each program can be made up of several cooking parameters
.
3.8
3.8
3.8
3.8 S
SS
Savin
avin
avin
aving cookin programs
g cookin programs
g cookin programs
g cookin programs
Following the steps below to save a cooking program (with the oven on: “On/Off” button pressed):
-
Leave the oven door open (to prevent parameter settings from automatically starting
the cooking cycle).
-
Set the relevant cooking cycle parameters following the same procedure used for
“manual” mode.
-
Turn the selector to “o” (“oFF” appears on the display).
-
Turn the regulator knob and select the required program number (from P01 to P10).
-
Press and hold down the “
” button for at least 5 seconds: the program is
successfully saved with the saved program number blinks on the display.
-
The saved program and cooking cycle start when the oven door is closed.
-
To cancel a saved program, simply replace it with a new program (with the same
number) where new parameters are set for the new cooking cycle. The new program
must be saved by pressing the “
” button.
3.9
3.9
3.9
3.9 C
C
C
Cooking with a saved program
ooking with a saved program
ooking with a saved program
ooking with a saved program
Following the steps below to recall a cooking program (with the oven on: “On/Off” button pressed):
- Turn the selector to “O” (“oFF” appears on the display).
- turn the regulator knob and select the required program number.
If the door is closed, the cooking cycle automatically starts 5 seconds after the program number is
selected.
When the oven is operating in “programmed” mode, set parameters can be displayed in the same
way as with “manual” mode.
For the user’s convenience, set parameters can be changed during oven operations in “programmed”
mode. At the end of the programmed cooking cycle, changed parameters are automatically “RESET”
and return to the values initially saved in the program.
3.
3.
3.
3.10
10
10
10 Cooking with the
Cooking with the
Cooking with the
Cooking with the “
“
“
“temperature at heart
temperature at heart
temperature at heart
temperature at heart”
”
”
” function
function
function
function (for prepared ovens)
(for prepared ovens)
(for prepared ovens)
(for prepared ovens)
The temperature can be set inside the core of the food to be cooked, using the special needle
core probe. The probe must be pushed into the centre of the food in the thickest part, avoiding
the bones. Place the food inside the cooking chamber and pull out the thermal probe lead and
