Page 11 of 25
5. Operation
Once you have set up the
VE 600
, and the power supply and the data cable are
connected, you can switch the device on.
Caution:
Before the device is switched on, please make sure that there are no obstructive
objects on the working surface of the engraver which could interfere with the free
movement of the engraving arm.
Operating panel
Switching the vacuum
cleaner on and off
Changing the rotational
speed of the engraving
spindle
Failure with the
engraving spindle
Delete transferred
data from the PC
Interruption or
breaking off the
engraving activity
5.1 Switching the VE 600 on and off
Turn the device on or off using the mains switch. When the device is switched on, the
engraving arm moves into the upper right-hand corner of the processing area, and
carries out auto-calibration. The green display lights up when the device is switched
on. The device is now ready for operation and can receive data from the PC.
All settings and actions are carried out via the operating panel.
VE 600
ready for
operation
Standardising the
engraving needle
zero setting
Changing the engraving
speed
Engraving spindle in
operation
Vacuum cleaner in
operation
Changing the penetration
speed
