- 9 -
STEP 1
Your GPU water block comes with thermal pads that have to be cut
into smaller pieces to cover all the VRM components, such as COILs,
MOSFETs, and drivers.
You must remove the protective foil from both sides of the
thermal pad before installation.
Replacement thermal pads:
Thermal PAD F 1.0 mm - (120 x 16 mm) - 3830046996732
Thermal PAD G 2.0 mm - (120 x 24 mm) - 3830046996794
STEP 1
CUTTING AND PLACING THERMAL PADS
Thermal Pad F – 1.0 mm (120 x 16 mm)
120mm
16
mm
1 mm
STEP 2
STEP 2
Once cut to size, thermal pads should be placed on the PCB, as
illustrated below. EK made sure to provide you with more than an
adequate quantity of thermal pads to complete this Step.
Thermal Pad G – 2.0 mm (120 x 24 mm)
120mm
24
mm
2 mm
Thermal Pad - 120 x 16 x 1.0 mm
F1
Thermal Pad - 120 x 24 x 2.0 mm
G2
F1
F1
F1
F1
F1
F1
F1
F1
F1
F1
F1
G2
G2
G2
G2
G2
