- 20 -
INSERTING THE GRAPHICS CARD INTO THE CHASSIS
Carefully lift your graphics card with the installed water block and
insert it into your PC’s motherboard PCIexpress expansion slot.
Please bear in mind that your graphics card is very likely heavier than
before it was equipped with the water block.
You need to be very careful when handling the
graphics card. Avoid all unnecessary manipulation
of the water block assembly that might damage your
card or water block.
CONNECTING THE D-RGB LED STRIP
STEP 1
Plug the
3-pin D-RGB connector
from the GPU water block to the
D-RGB Header
on your motherboard or controller. The LED strip will
work only if the pin layout on the header is as follows:
+5V, Data,
Empty, Ground
.
Incorrect installation or installation to a wrong header can
damage to the LED strip or the header itself!
STEP 1
D-RGB HEADER
RGB HEADER
