- 16 -
ATTACHING THE BACKPLATE
STEP 1
Apply 3 small pea-sized dots of enclosed EK-TIM Ectotherm thermal
grease on the water block as shown in the image.
STEP 1
STEP 2
Place the backplate on the PCB and make sure all holes are aligned.
Position an M2.5 x 7 AX1 screw in each of the four (4) mounting
holes (as shown in the image) and tighten them evenly with a
Phillips Head Screwdriver.
STEP 2
M2.5 x 7 AX1 SCREW
BACKPLATE
For this step, you will need:
M2.5 x 7 AX1
Screw (4 pcs)
7 mm
Thermal Grease
For this step, you will need:
Phillips Head
Screwdriver
