18
Chapter 2 Installation / Connection
Setting up a daisy-chain connection to another monitor
The signal input to is output to another monitor.
Attention
• Visit the EIZO website for information about monitors and graphic boards that can be used for the daisy-
chain connection: http://www.eizoglobal.com
•
When connecting the monitor in a daisy-chain configuration, you need to set “Signal Format” -
“DisplayPort 1” - “Version” in the Setting menu to “1.2”, and “Daisy Chain” to “On”.
• Remove the cap before connecting the signal cable.
Signal cable: PP300
Connecting to a Computer
Signal cable: PP300
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
Insert the power cord fully into the monitor.
3.
When you use RadiCS / RadiCS LE or connect a USB device (peripheral device
that supports USB) to the monitor, connect the USB cable to the monitor's
USB upstream port and the PC.
Connecting to the Monitor
Connecting to a Computer
Attention
• When connecting the monitor to a PC on which RadiCS / RadiCS LE has been installed, connect the cable
to
.
• Remove the cap before using
.
Note
•
When the monitor is used in PbyP mode to display images from two PCs, use of some quality control
features such as calibration may be restricted.
