0
2. Cable Connection
-. 10bit Color Signal Input
NOTE
•Before a 10bit color signal can be input, your graphics board must configured. For
details, refer to the user's manual for the graphics board.
•For more on connecting the monitor and computer, refer to “2-2. Single Link
Cable Connection” (p. 14)
•If the image does not display correctly, verify the “Signal Selection” settings.
Verifying “Signal Selection” Settings
1
Turn off the monitor's power by touching the power switch.
2
Touch the power switch while touching the mode switch.
3
The <Signal Selection> menu appears
on the screen. Select “Single Link/
10bit” and touch the enter switch.
4
Next the <Orientation> menu appears.
Select (or check) the orientation with
directing switches according to your
monitor orientation and touch the enter
switch.
Monitor Orientation
Display Example
Landscape
Select this option when using the Landscape orientation.
A
A
Portrait (SW)
Select this option when using the Portrait orientation. Graphics
board utility software is used to rotate the display image 90
degrees.
Portrait (HW)
Select this option when using the Portrait orientation. The monitor
function is used to rotate the display image 90 degrees.
5
Restart the computer if the settings have been changed.
"Signal Selection" menu
"Orientation" menu
