2 | Installation / Connection
22
2.2 Connecting Cables
Attention
• Check that the monitor, PC, and peripherals are powered off.
• When replacing the current monitor with this monitor, see
to
change the PC settings for resolution and vertical scan frequency to those that are available for
this monitor, before connecting the PC.
1. Connect signal cables.
Check the shapes of the connectors, and connect the cables. After connecting the DVI
cable, tighten the fasteners to secure the connector.
Signal cable: DD300 / DD200
or
Signal cable: PP300
(optional)
Attention
• The DisplayPort connectors of the monitor consist of input and output connectors. When
connecting the monitor to a PC, connect the cable to the input connector.
• When connecting to multiple PCs, switch the input signal. For details, refer to the Installation
Manual (on the CD-ROM).
Note
• If the cables are difficult to insert, adjust the angle of the screen.
When connecting other monitors using a daisy-chain connection
The signal input to
is output to another monitor.