background image

ENGLISH

PRECAUTIONS

7

OK

• Handle with care when carrying the unit.

Disconnect the power cord and signal cables and remove the optional

 unit.

Moving the unit with the cord or the option attached is dangerous.  It may result
in injury or equipment damage.

• Do not move it alone.  Always work with another person.

Moving it alone may cause lower back pain.  Also note that the unit is heavier
at the front than at the rear.

• Do not block the ventilation slots on the cabinet.

* Do not place books or any other papers on the ventilation slots.
* Do not install the unit in a closed space.
* Do not use the unit laying down or upside down.
* Do not remove the tilt-swivel stand.

Using the unit in this way block the ventilation slots and prevents proper
airflow, leading to fire or other damage.

• Do not sit on the cabinet or place any heavy objects on the cabinet.

A unit with heavy objects on it may fall or be damaged and result in injury.

• Do not touch the plug with wet hands.

Touching the plug with wet hands is dangerous and can cause electrical
shock.

• Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a
problem.

• Periodically clean the area around the plug.

Buildup of dust, water, or oil on the plug may result in fire.

• Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric
shock.

• If you plan to leave the unit unused for an extended period, disconnect

the power cord from the wall socket after turning off the power switch for
the safety and  the power conservation.

 CAUTION

Содержание FlexScan T 565

































Отзывы: