Eizo EIZO ColorEdge CG241W, Руководство по установке

Страница: 5 / 36

3
Connecting Cables
Check that the monitor and the PC are powered off.
1
Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the PC cable Connectors on the monitor
1 L A N G I S
1 L A N G I S
2
Connect the monitor to the PC with the USB cable.
Note
• The USB cable is required for calibration. Be sure to connect the monitor and PC with the USB cable.
3
Plug the power cord into a power outlet and the power connector on the monitor.
4
Press to turn on the monitor.
The monitor’s Power indicator lights up blue.
5
Turn on the PC.
The screen image appears.
If an image does not appear, refer to "No-Picture Problem" for additional advice.
Note
• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off
power supply to the monitor.
Adjusting the Screen Height and Angle
Adjust the screen height, tilt and swivel the screen to the best condition for working.
Connecting to the Monitor
Connecting to a Computer
Signal cable FD-C16
Signal cable FD-C39
USB cable
Digital/Analog signal cable
Power cord
English