19
Chapter 2 Configuring from the monitor screen
Other
Attention
•
Cannot be set if using a network camera compatible with the “ONVIF” protocol.
2
1
1.
Configure the items.
Item
Detail
Setting range
Pan/Tilt-flip
Turn on/off the pan/tilt-flip function
*1
.
On/Off
Upside-down
*2
Turn on/off the network camera upside down
function.
On/Off
Indicator
Turn on/off the network camera Indicator.
On/Off
*1
The pan/tilt-flip function reverses the pan/tilt direction automatically at high-speed when the network
camera reaches the movement endpoint. This function allows the user to make pan/tilt operations without
paying attention to movement endpoints.
*2
Check the network camera installation specifications before using the upside down function. Depending
on the network camera type, it may not be possible to install the camera upside down even when the
camera supports the upside down function.
2.
Select “Apply”.
The setting complete screen is displayed. Select “OK”.
3
