Eizo CuratOR EX3242, Руководство по установке

Страница: 4 / 26

4
Chapter 1 Basic Adjustment / Setting
Chapter 1 Basic Adjustment / Setting
This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the
bottom of the monitor.
1-1. Loading the Monitor Settings
Basic settings are made in advance at the factory.
It is possible to switch to the following preset settings that have been set in advance.
DisplayPort [sRGB] Basic settings for DisplayPort when displaying the color gamut in sRGB. The input signal
is set to DisplayPort and the color gamut to sRGB when this item is selected.
Settings cannot be changed.
For information about the main default settings, see “4-1. Main Default Settings” (page 18) .
DisplayPort [BT.2020] Basic settings for DisplayPort when displaying the color gamut in BT.2020. The input
signal is set to DisplayPort and the color gamut to BT.2020 when this item is selected.
Settings cannot be changed.
For information about the main default settings, see “4-1. Main Default Settings” (page 18) .
HDMI [BT.2020] Basic settings for HDMI. The input signal is set to HDMI when this item is selected.
Settings cannot be changed.
For information about the main default settings, see “4-1. Main Default Settings” (page 18) .
SDI [BT.2020] Basic settings for SDI. The input signal is set to SDI 1 when this item is selected.
Settings cannot be changed.
For information about the main default settings, see “4-1. Main Default Settings” (page 18) .
“User1” through
“User5”
You can save the current setting values and display status in the following items.
These items are not selectable unless they have been saved. For details, see “Saving
current settings to “User1” through “User5”” (page 5) .
1.
Press (PRESET).
The preset menu is displayed.
2.
Press to select the item to load, and then press (ENTER).
The pre-made settings are loaded and the settings are changed.
Note
• The preset menu will disappear after about 10 seconds have elapsed if no operation is performed.