eisfink varithek acs 1000 ec Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 56

eisfink varithek acs 1000 ec Скачать руководство пользователя страница 33

Cleaning, Maintenance and Care

Eisfink Max Maier GmbH & Co. KG

33

8

Cleaning, Maintenance and Care

This chapter will help you to meet the hygiene requirements. Before reading this section, please read through
the "General safety instructions" section thoroughly first.

8.1

Safety information relating to cleaning, maintenance and care

Avoid dangers due to electricity

WARNING

Danger of electric shock. Risk of death.

►

Disconnect the appliance from the mains; disconnect the power supply unit.

►

Protect the appliance against moisture. Never direct a jet of water at electrical
components such as heater, controller or ventilation grille.

►

Check the heating and connecting cable for any damage.

►

Do not use a steam cleaning unit to clean electrical appliances. Doing so may allow
moisture to get into the electrical system and cause a short circuit. Do not expose to
spray water. To clean the electrical part, use a damp cloth and dry the surface using a
dry cloth.

►

Have electrical equipment inspected

at least every 6 months

2

by a qualified

electrician.

Risks due to human error when



using the Eisfink active carbon filter for odour and

contaminant absorption and odour elimination using plasma technology

WARNING

Breathing difficulties, lacrimal irritation, mucosal irritations in throat, neck and lungs,
headache, strong tickle in the throat, cannot be excluded in the case of human error.

►

Only use with Eisfink active carbon filters, which are correctly mounted.

►

Do not interfere with the extraction and circulating-air cleaning: Do not place any
objects on the Eisfink active carbon filter in the technical compartment. Only operate
with a dry Eisfink active carbon filter.

Fire risks

Risk of fire

Risk of fire due to missing or incorrectly mounted filter components.

►

Only use with original filter components and grease drip trays, which are correctly
fitted.

►

Clean filter area daily.

2

Source: DGUV Regulation 3. Electrical Systems and Equipment

«
...
31
32
33
34
35
...
»

Содержание varithek acs 1000 ec

























































Отзывы:

Нет отзывов