eisenblatter VARILEX Akku 6112-5.0 Скачать руководство пользователя страница 18

Страница: 18 / 24

Original User Manual

Varilex

Akku

RISK OF INJURY

• Always use the angle grinder with the guard

attached.

• The guard must be securely attached to the

angle grinder. Adjust it so as to ensure the

highest level of safety, i.e., the smallest pos-

sible part of the grinder is visible opposite

to the user. The guard is designed to protect

the operator from fragments and accidental

contact with the grinding tool.

RISK OF INJURY

• Please ensure that the guard

is fitted

atleast at the same angle as the handle

(see Fig. B). If it is not then you could injure

yourself on the grinding or cutting disc.

• Undo the clamping lever

• Position the guard

with the locating lugs

in the coding groove

• Rotate the guard

to the required position

• (operating position). The closed side of the gu-

ard

must always face towards the operator.

• Close the clamping lever

to clamp the

guard

in place. If necessary,

the clamping force of the clamp can be adjus-

ted by loosening or tightening the adjusting

nut

. Please ensure that the guard

placed securely on the spindle.

Attach Handle

CAUTION!

• For safety reasons, this grinder must only be

wielded using the handle

. Failure to do

so could result in serious injury. The handle

can be attached to either side of the

grinder.

Attach / Replace Grinding Disc / Cutting Disc

Always wear safety gloves when replacing grin-

ding or cutting discs. Both grinding and abrasive

cutting discs get extremely hot under operating

conditions: do not touch them until them have

cooled down. Observe the dimensions of the

grinding and cutting discs. The hole diameter

must correspond to the mounting flange

. Ne-

ver use reduction inserts or adapters. Check the

grinding or cutting disc. It must not be damaged,

damp or cracked, either of which could cause

it to break and cause injury under operating

conditions..

PLEASE NOTE

• It is imperative that you only ever use clean,

non-contaminated discs.

• Without exception, always use grinding tools

whose permissible rotation speed is at least as

high as the idling speed of the grinder.

• RISK OF INJURY!

Only ever press the spindle

arrester button

when the spindle

has

come to a complete stop.

• Press the spindle arrester button

to block

the transmission system.

• Undo the lock nut

with the aid of the dou-

ble- pin installation spanner

(see Fig. D).

• Place the grinding or cutting disc on the

mounting flange, with the lettered side pointing

towards the grinder.

• Then replace the locking nut

, on the spind-

, with the rounded side pointing upwards

Содержание VARILEX Akku 6112-5.0

























Результаты поиска

Содержание VARILEX Akku 6112-5.0

Отзывы:

eisenblatter VARILEX Akku 6112-5.0, Оригинальное руководство пользователя, Страница: 18 / 24

Результаты поиска

Содержание VARILEX Akku 6112-5.0

Отзывы: