GB
- 31 -
the sandpaper becoming jammed or torn, or
produce kick-back.
Special safety instructions for polishing:
a) Make sure there are no loose parts, in parti-
cular fastening ties, on the polishing bonnet.
Roll up or shorten the fastening ties. Loose,
rotating ties may catch your
fi
ngers or get
jammed in the workpiece.
Do not lose these safety instructions
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Spindle lock
2. Front grip
3. ON/OFF switch
4. Speed control
5. Rear grip
6. Power cord
7. Polishing / sanding disk
8. Speed
indicator
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
1 Sanding and polishing machine
2 Additional
handle
3 Polishing / sanding disk
4 Foamed plastic attachment
5 Synthetic polishing attachment
6 Sanding attachment K = 60
7 Sanding attachment K = 80
8 Sanding attachment K = 120
9 Hexagon key 8 mm
10 Screw M10x20 mm (2x)
•
Original operating instructions
3. Proper use
The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Improper use
All applications with the device which are not sta-
ted in the chapter “Intended use” are deemed to
be contrary to the intended use.
The device must not be used for the following
purposes:
•
Work on lightweight partition walls (drywalls)
and other surfaces containing plaster, ce-
ment, foam, mineral fiber and silicate.
•
Work on metals involving the generation of
metal dust.
•
Working on coatings containing lead and
working on types of wood and metal which
generate harmful or toxic dust
•
Sharpening, engraving with corresponding
attachments
•
Working on materials containing asbestos
•
Use in areas where there is a risk of explosion
•
Sanding on damp walls
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_SA_CC_PO_1100_1_E_SPK8.indb 31
Anl_SA_CC_PO_1100_1_E_SPK8.indb 31
29.04.2020 07:04:29
29.04.2020 07:04:29
